Beskrivning
Välj mellan 0 Mil Extended och 6 Mil Extended
0Mil Extended
Article no.: R-7042
Picatinny Gen2 Scope Base for Sauer 200 STR High Quality Dehorned Scope Mount Base Based on a decade of experience designing and manufacturing the original Ideal Scope Mount System – including a vast number of accessories – as well as forends and stock assemblies for various firearms, we are proudly providing you with the Next Generation Picatinny Rail Scope Bases.
Our Picatinny Gen2 scope bases feature properly dehorned edges for improved repeatability and a smooth touch. Using 7075 T651 aluminum we combine strength and durability with low weight. Rail comes with 6-48×1/4″ Torx 10-screws and stainless steel pins for optional pinning of the scope base to the action.
Can be used on right and left-handed actions alike.
Installation will require drilling and tapping of the receiver (see downloadable Drill Pattern for measurements).
Tilt: 0 MIL/MOA Height: 14 mm/0.55” Length: 215 mm/8.46” Weight: 100 g/3.5 oz (w/ screws – add 1.2 g/0.04 oz for pins)
Note: Height is measured from the top of the action in the rear to the top of the Picatinny. Recommended torque for Torx 10 screws is 15-18 in/lbs.
6Mil Extended
Article no.: R-7642
Picatinny Gen2 Scope Base for Sauer 200 STR High Quality Dehorned Scope Mount Base Based on a decade of experience designing and manufacturing the original Ideal Scope Mount System – including a vast number of accessories – as well as forends and stock assemblies for various firearms, we are proudly providing you with the Next Generation Picatinny Rail Scope Bases.
Our Picatinny Gen2 scope bases feature properly dehorned edges for improved repeatability and a smooth touch. Using 7075 T651 aluminum we combine strength and durability with low weight.
Rail comes with 6-48×1/4″ Torx 10-screws and stainless steel pins for optional pinning of the scope base to the action.
Can be used on right and left-handed actions alike. Installation will require drilling and tapping of the receiver (see downloadable Drill Pattern for measurements).
Tilt: 6 MIL/20.6 MOA Height: 15 mm/0.59” Length: 215 mm/8.46” Weight: 107 g/3.8 oz (w/ screws – add 1.2 g/0.04 oz for pins)
Note: Height is measured from the top of the action in the rear to the top of the Picatinny. Recommended torque for Torx 10 screws is 15-18 in/lbs.
Recensioner
Det finns inga recensioner än.